Are you tired of looking at the same dull walls in your living room? Applying a wallpaper can be the easiest way to transform your room and give it a fresh new look. However, the process of putting up wallpaper can be intimidating, especially if you have never done it before. But don’t worry; we have got you covered. In this article, we will guide you through the process of applying wallpaper on your walls like a pro.
Table of Contents
Step 1: Prepare the Walls
Before you start applying the wallpaper, you need to make sure that the wall is clean and smooth. Remove any dirt, grease, or old wallpaper from the surface using a wallpaper stripper. If the wall has any holes or cracks, fill them with a suitable filler and sand it down to create a smooth surface.
Step 2: Measure the Wall
Measure the height and width of the wall and calculate the amount of wallpaper you will need. It’s always better to order a little extra to ensure that you have enough to cover any mistakes or miscalculations.
Step 3: Cut the Wallpaper
Using a wallpaper cutter, cut the wallpaper into strips that are slightly longer than the height of the wall. Make sure that the pattern on the wallpaper lines up correctly before cutting it.
Step 4: Apply the Wallpaper
Apply the wallpaper paste to the back of the wallpaper using a brush or a roller. Fold the wallpaper in on itself, with the paste side facing inwards, and leave it to soak for a few minutes. Starting from the corner of the wall, align the top of the wallpaper strip with the ceiling and slowly unroll it down the wall, smoothing out any air bubbles or wrinkles as you go. Use a wallpaper brush or a smoothing tool to smooth out the wallpaper and remove any excess paste.
Step 5: Repeat the Process
Repeat the process, making sure that each strip of wallpaper lines up with the previous one. Take care not to overlap the edges of the wallpaper strips or leave any gaps between them.
Step 6: Trim the Edges
Once you have applied all the wallpaper strips, use a wallpaper cutter to trim the excess paper at the top and bottom of the wall. Make sure that the cutter is sharp to avoid tearing the paper.
Step 7: Enjoy Your New Wall
Once you have trimmed the edges of the wallpaper, stand back and admire your new wall. Allow the wallpaper to dry completely before moving any furniture back into the room.
Tips for Applying Wallpaper
– Always start from the corner of the room and work your way out – Don’t stretch the wallpaper as you apply it, as this can cause it to tear or wrinkle – Use a wallpaper brush or a smoothing tool to smooth out any air bubbles or wrinkles – If you make a mistake, don’t panic. Simply peel off the wallpaper and start again – Take your time and work systematically to ensure a neat and professional finish
Conclusion
Wallpapering may seem daunting, but with a little bit of patience and practice, anyone can do it. By following our step-by-step guide, you can transform your room and give it a new lease of life. Whether you choose a bold pattern or a subtle texture, applying wallpaper is a great way to add personality and style to your home.
Summary
| Step | Description |
|---|---|
| 1 | Prepare the walls by cleaning and smoothing the surface |
| 2 | Measure the wall and calculate the amount of wallpaper needed |
| 3 | Cut the wallpaper into strips that are slightly longer than the height of the wall |
| 4 | Apply the wallpaper paste to the back of the wallpaper and slowly unroll it down the wall |
| 5 | Repeat the process, making sure that each strip of wallpaper lines up with the previous one |
| 6 | Trim the excess paper at the top and bottom of the wall |
| 7 | Allow the wallpaper to dry completely before moving any furniture back into the room |
