Are you planning to give your home a fresh look by adding some wallpaper? If so, you may be wondering how to tackle the challenge of wallpapering around a pillar. Don’t worry! With a bit of patience and some handy tools, you can make your wall design look seamless and professional. Here are some tips and tricks to help you wallpaper around a pillar like a pro.
Table of Contents
1. Prepare Your Tools and Materials
Before you start applying wallpaper, make sure you have all the necessary tools and materials at hand. You’ll need wallpaper, wallpaper paste, a wallpaper brush, a wallpaper smoother or squeegee, a utility knife, and a ladder. It’s also a good idea to cover the surrounding floor and furniture with a drop cloth to protect them from any stray wallpaper paste.
2. Measure and Cut the Wallpaper
Measure the height and circumference of the pillar to determine how much wallpaper you need. Add a few extra inches to the height and circumference measurements to allow for trimming and overlapping. Cut the wallpaper into manageable strips that are slightly wider than the pillar’s circumference. This will make it easier to handle and match the pattern.
3. Apply Wallpaper Paste to the Pillar
Using a wallpaper brush, apply a thin, even layer of wallpaper paste to the pillar’s surface. Make sure to cover the entire area where you’ll be placing the wallpaper strip. Avoid applying too much paste, as this can cause the wallpaper to bubble or wrinkle.
4. Position and Smooth the Wallpaper
Carefully position the wallpaper strip over the pillar, making sure to match the pattern as closely as possible. Use a wallpaper smoother or squeegee to gently smooth out any air bubbles or wrinkles. Work from the center of the strip outward to remove any excess paste and ensure a secure bond.
5. Trim the Excess Wallpaper
Use a utility knife to trim the excess wallpaper from the top and bottom of the pillar. Make sure to leave a bit of excess at the top and bottom to allow for future adjustments. Trim the excess wallpaper from the seam where the two ends meet, using a straight edge as a guide.
6. Repeat the Process
Continue applying wallpaper strips around the pillar, working in a clockwise or counterclockwise direction. Match the pattern as closely as possible, and smooth out any bubbles or wrinkles as you go. Remember to trim the excess wallpaper from each strip before moving on to the next.
7. Finish with a Top Coat
Once you’ve wallpapered the entire pillar, let it dry completely before applying a top coat of wallpaper paste. This will seal the wallpaper and protect it from wear and tear. You can also use a clear varnish or sealant for added protection.
Summary Table: How to Wallpaper Around a Pillar
| Step | Description |
|---|---|
| 1 | Prepare your tools and materials |
| 2 | Measure and cut the wallpaper |
| 3 | Apply wallpaper paste to the pillar |
| 4 | Position and smooth the wallpaper |
| 5 | Trim the excess wallpaper |
| 6 | Repeat the process |
| 7 | Finish with a top coat |
With these simple tips and tricks, you can wallpaper around a pillar with ease and confidence. Just remember to take your time, work carefully, and enjoy the process of transforming your space with beautiful wallpaper.
